Simple Bookshelf
I made some 2' bookshelves for my wife's hobby room. I wasn't happy with the appearance and revised the drawing (untested) to move the brackets in one inch from each end. Original pictures, new drawing, and Aspire file below.
Material is 2 8" X 8' boards, cut in half to make 4 4' boards. The drawing uses the fact that each board is actually 7.25" in size. I mounted them with some side pressure lever holdowns I made, drilled the 1/8" holes, then screwed the boards down to my spoilboard using some of the holes.
Click images for full size view.
